What type of spreader is Scotts speedy Green?

What is the setting for Scotts speedy green 3000?

Answer: You would set your speedy green broadcast spreader at 3 ¾ for the Fertilome F Stop. This is a rate of 4 lbs per 1,000 sqft to treat for turf diseases. 5 of 6 people found this answer helpful.

What setting should Scotts spreader grass be set at?

Since settings will vary based on seed, it’s essential to verify this. For example, according to Scotts, the Scotts broadcast spreader settings for ryegrass seed should be set at setting 15 for new lawns and setting 5 for reseeding.

What setting on spreader for pre emergent?

For pre-emergent herbicides, put the setting on or a notch above one quarter. (If there are 20 notches, 5-6 would be the setting.) On hand-held spreaders, if there are 5 or fewer settings lower the setting to 3, or even 2. If a hand-held spreader has 10 or more settings, put the setting on or a notch above one quarter.

What spreader setting should I use for Scotts EZ seed?

Put your EZ seed in the hopper, set your scotts spreader at the max setting and walk back and forth spreading it as evenly as possible.

How do I spread grass seed with Scotts spreader?

What setting should I use on my Scotts spreader for starter fertilizer?

Spreader Not Listed – Setting Tip: Set spreader at 1/4 to 1/3 of the dial as a starting point.

What do the numbers on a Scotts broadcast spreader mean?

The numbers stand for an application rate. A bag of commercial fertilizer will usually have numbers for where to set either broadcast or drop spreaders to get the recommended amount of fertilizer laid down.

What rate should I spread fertilizer?

You should apply 10 pounds of the fertilizer per 1,000 square feet (five pounds from the table multiplied by the two pound recommendation). * When using a soluble inorganic nitrogen fertilizer a typical recommendation is to use only one pound of nitrogen per 1,000 square feet for a single application.

How do I fertilize my lawn with broadcast spreader?

Should I mow before fertilizing?

Ideally, you’ll want to mow and rake before fertilizing, so that excess lawn waste is removed and the fertilizer will have an easier time reaching the soil. Aerating your soil before fertilizing can also help; the best times to aerate are when your grass is actively growing, such as in spring or early fall.

How far does a Scotts broadcast spreader spread?

Up to 5,000 sq. ft.

Which is better a broadcast or drop spreader?

Drop spreaders are particularly valuable when you must be precise in the product’s release, whereas a broadcast spreader’s main function is to efficiently broadcast in all directions. Drop spreaders will also make sure you don’t waste any product as you’re spreading.

Which Scotts spreader is best?

Best Drop Spreader: Scotts Classic Drop Spreader

This spreader holds enough fertilizer in its large-capacity hopper for up to 10,000 square feet of coverage. It also has a spread pattern of 22 inches to cover around a quarter of an acre quickly. With its coated handle, it’s easy and comfortable to control.

How big of a broadcast spreader do I need?

A handheld spreader is well suited for small lawns up to 1,500 square feet. For medium-size lawns up to 5,000 square feet, a small walk-behind spreader suits the job. Large walk-behind spreaders work well for yards up to about 20,000 square feet.

Do you overlap with a broadcast spreader?

Your current pass should spread product so it overlaps by a couple of feet the edge of the pattern of product spread from the previous pass (25% overlap).

How far does a broadcast spreader throw?