Multi-purpose grease designation: 0781 120 1110 (225 g tube)
What grease to use in Stihl hedge Trimmer?
This grease, formulated for hedge trimmer and electric saw gear gears, adheres well to metal surfaces and thus provides extremely good protection from wear, even in extreme summer or winter temperatures.
How do you grease the head on a Stihl FS 56 RC?
How often do you grease a STIHL trimmer head?
The Stihl maintenance schedule for weed eaters recommends checking and filling the gearbox with grease after every 25 hours of operation to keep internal metal parts lubricated.
What type of grease is Stihl grease? – Related Questions
How do I get rid of the bump on my STIHL head?
How do you lubricate a trimmer head?
How do you grease a string trimmer head?
How do you grease a STIHL shaft?
How do you grease a STIHL gearbox?
What happens if you don’t grease a gearbox bearing?
Loss of lubricant – if a bearing isn’t re-greased with proper intervals and the proper amount of grease, loss of lubricant and lubrication can result and contribute to equipment failure.
Can you over grease a gearbox?
A sufficient amount of grease must be used to ensure gear teeth are lubricated, but excess grease can result in power losses and viscous drag.
Should gears be greased or oiled?
At low speeds, grease lubrication is a good choice. For medium and high speeds, splash lubrication and forced oil circulation lubrication are more appropriate, however there are exceptions. For example, some systems have maintenance reasons for which a grease lubricant is used even with high speeds.
How do I know if my gearbox needs oil?
How to know if gearbox oil is low – the signs
- Late engagement. Low levels of gearbox oil usually result in 2-3 second delays when shifting between gears.
- Your car is lurching.
- Vibration.
- Issues with the clutch.
- Dark-coloured fluid.
- Transmission slipping.
- Grinding.
- Can you prevent gearbox replacement?
Is silicone grease good for gears?
In lubricants, a silicone base oil is commonly used in greases for plastic gears, control cables, and seals because they are inert, compatible with most plastics and elastomers, and remain stable over a wide temperature range.
Is Vaseline good for gears?
Works great in pushrod tubes, gears, and anything you don’t want a greasy dirt collecting product. Leaves a slick DRY film. I use it in pushrod tubes and they move smooth as silk.
What is a good lubricant for gears?
Rheolube® 374A. Commonly referred to as Nye’s landing gear grease, Rheolube® 374A is recommended for metal gears that operate at low speeds under a wide temperature range.
Should plastic gears be greased?
Wherever possible, you should lubricate plastic components to reduce friction and wear, and increase component life. Tests show that lubricated plastic sliding bearings last up to five times longer than nonlubricated ones.
Which type of lubricant is preferred for gears?
At low speed, grease lubrication is a good choice. For medium and high speeds, splash lubrication and forced oil circulation lubrication are more appropriate, but there are exceptions. Sometimes, for maintenance reasons, a grease lubricant is used even with high speed.
Who makes the best gear oil?
Best Gear Oils comparison table
- 1st Place. Royal Purple ROY01300 Max Gear 75W-90 High Performance Synthetic Automotive Gear Oil, 1.
- 2nd Place. Ultra1Plus™ SAE 80W-90 Conventional Gear Oil API GL-5 | 6 Pack QTS.
- 3rd Place. 3 Liter Hypoid Gear Differential Oil LIQUI MOLY (GL5) SAE 85W-90 235.0.
- 4th Place.
- 5th Place.
What can I use as a substitute for gear oil?
Substitutes for Gear Oil Manual Transmission Fluid (MTF) An obvious substitute for the American Petroleum Industry Gear Lubricant (API GL-4 or GL-5) typically used in your vehicle is an appropriate MTF for your make and model. Automatic Transmission Fluid (ATF) Motor Oil.