The setting that you will use when applying Bifen Granules with a Scotts Edgeguard DLX is a 2 or a 3 depending on how quickly you walk. 141 of 151 people found this answer helpful.
What should my spreader setting be?
How do you use Scotts Turf Builder EdgeGuard broadcast spreader?
What do the numbers mean on a Scott’s spreader?
The numbers stand for an application rate. A bag of commercial fertilizer will usually have numbers for where to set either broadcast or drop spreaders to get the recommended amount of fertilizer laid down.
What setting is Scotts EdgeGuard? – Related Questions
What does EdgeGuard do on Scotts spreader?
This lawn spreader comes pre-calibrated and ready-to-use, and holds up to 15,000 sq. ft. of Scotts® product. When EdgeGuard™ is engaged, it will block off the right-side of the spreader pattern to prevent product from spreading onto non-lawn areas.
What setting should Scotts spreader grass be set at?
Since settings will vary based on seed, it’s essential to verify this. For example, according to Scotts, the Scotts broadcast spreader settings for ryegrass seed should be set at setting 15 for new lawns and setting 5 for reseeding.
What should I set the spreader to for grass fertilizer?
Set your spreader so that the opening(s) in the bottom are ¾ open when engaged. Put 6.5 pounds or 1/5 of a bag of Milorganite into your spreader. Begin fertilizing your lawn, starting along an edge, and continue until the spreader is empty. Leave the spreader where it was when it ran out of Milorganite.
What are the numbers on Scotts Turf Builder?
A: Thank you for your question regarding Scotts Turf Builder Lawn Fertilizer. Those numbers are the NPK. Which is the amount of Nitrogen, Phosphorous, and Potassium in the product. The NPk for this product is as follows: Nitrogen-32, Phosphorous-0, Potassium-4.
How do you set Scotts spreader?
What are the numbers on Scotts Turf Builder?
A: Thank you for your question regarding Scotts Turf Builder Lawn Fertilizer. Those numbers are the NPK. Which is the amount of Nitrogen, Phosphorous, and Potassium in the product. The NPk for this product is as follows: Nitrogen-32, Phosphorous-0, Potassium-4.
How do you adjust a Scott spreader?
How do you set Scotts spreader?
How do you use Scotts Turf spreader?
What setting should I use on Scotts Edgeguard spreader for lime?
Pelletized lime should be applied every other year (approximately 15 lbs./1,000 ft²) once you have your soil pH to its optimum level, which is between 6.0 and 6.5.
Lime.
| Spreader | Setting |
|---|
| Scotts (Drop) | 11.5 |
| Scotts (Broadcast) | J |
| Earthway EV-N-SPRED | 21 |
| Greenview | 3 or 4 |
At what rate do you spread lime?
Use this rule of thumb—lime should be applied at a rate of 40 pounds per 1000 square feet. Apply lime to your yard at the same time you are sowing new seeds. Make sure to seed at the recommended rate and to keep the grass seed moist and water daily to keep the grass seed from drying out.
What’s the best time to apply lime to your lawn?
What’s the best time to apply lime? Fall and spring are generally the best times to lime lawns. Fall has an added advantage, as rain, snow and cycles of freezing and thawing help lime break down and begin to work.
How do I know if my lawn needs lime?
Signs You Need to Apply Lime
- You have sandy or clay soil.
- Weeds or moss have grown in your yard.
- The fertilizer you’re using doesn’t appear to be working.
- Your area experiences a lot of rainfall, especially acid rain.
- The grass is yellowing.
Do you apply lime to wet or dry grass?
Lime should only be applied to a dry lawn, and never to a lawn that is dormant, wilted, or stressed.
Should you put lime on your lawn every year?
Lime shouldn’t be applied to grass and yards that are wilted or covered in frost. Since it can take two years for lime to move 2 inches into your soil, avoid over liming by applying lime only every three to five years.
Can you put lime down in March?
Apply Any Time
If soil testing indicates your yard needs lime, you can apply it at any time of the year when grass is actively growing. Don’t apply lime when turf is frost covered or wilted from extreme heat. Water the turf after application to wash the lime off the grass blades and down into the soil.
Richard Gray is a knowledgeable and passionate writer and editor with extensive experience in the personal finance, real estate, and investments industries.
He has helped countless readers make informed decisions about their finances and investments, and he believes strongly in financial literacy.
