What kind of grease do you use in a Stihl hedge trimmer?

Stihl Genuine 0781 120 1109 80g Gear Lubricant A/B.

How do you grease a Stihl gearbox?

Which grease is best for gears?

Rheolube® 374A. Commonly referred to as Nye’s landing gear grease, Rheolube® 374A is recommended for metal gears that operate at low speeds under a wide temperature range.

What kind of grease do you use in a Stihl hedge trimmer? – Related Questions

Is Moly grease good for gears?

SealXpert Moly Grease is suited to a wide range of applications, including bearings, gears, and sliding parts. These moly greases have lithium soap as the base and have excellent water resistance and shear stability. SealXpert Moly Grease are versatile greases recommended for general and a wide range of applications.

When should you not use Moly grease?

Greases containing molybdenum disulfide shouldn’t be used in applications that see excessive amounts of water ingress as the molybdenum disulfide can have a corrosive effect of the metal surfaces, and is not suited for bearings and other components that move at a rapid pace.

Is White lithium grease good for metal gears?

White lithium grease demonstrates excellent adhesion to metal and is perfect for lubricating metal on metal surfaces.

Which type of lubricant is preferred for gears?

At low speed, grease lubrication is a good choice. For medium and high speeds, splash lubrication and forced oil circulation lubrication are more appropriate, but there are exceptions. Sometimes, for maintenance reasons, a grease lubricant is used even with high speed.

Which grease is used in gear box?

PAO-based Grease for lubricating common metal, plastic and elastomeric substrates. It offers excellent noise-damping properties, even under extreme pressure at high frequency. PAO-based Grease designed to be used for plastic and metal components in automotive gear boxes and actuators.

Can I use bearing grease on gears?

Do NOT use bearing grease on your carrier bearings or pinion bearings when setting up your differential. This could cause premature failure from the oil not having the ability to lurbicate the bearings properly. Use clean gear oil only to pre-lubricate your bearings during the install.

See also  How do I know if my Cub Cadet solenoid is bad?

What type of grease should I use on my drive shaft?

We recommend a good quality grade 2 grease with calcium sulfonate as an additive, but any grease will do. Just don’t overlook that cv center ball! Take a look at the center ball anatomy pictures below. For our complete guide to greasing your drive shaft, click here.

Is lithium grease good for metal gears?

White lithium grease demonstrates excellent adhesion to metal and is perfect for lubricating metal on metal surfaces. On the other hand, silicone lubricant can be used on a variety of surfaces.

Where should you not use lithium grease?

Lithium-based lubricants are used in cars and machinery in general. It’s not advisable to use them on plastic parts. As lithium is based on petroleum, it tends to speed up rubber and plastic components decay.

Can I use white lithium grease on gears?

White lithium grease has been the typical grease teams use for gears in FRC applications.

What is the difference between white and red lithium grease?

The difference between the two types of grease is the ingredients used to make the grease. White lithium grease has zinc oxide added to the formulation.

Does the color of grease mean anything?

One thing we are sure of, however – color does not denote a particular type of grease, whether it is red, green, blue or yellow. The color is simply a dye added by manufacturers for marketing purposes, to more easily distinguish the different greases in their product lines.

Does the color of grease matter?

While operators tend to associate the grease they use with a color, like deep red or bright blue. As described in the video from Mobil below, the color of the grease does not change the performance characteristics and it is only the manufacturer who determines what color their grease is.

See also  How do you adjust the choke on a Briggs and Stratton engine?

Can you mix red and blue bearing grease?

Don’t Mix Grease, but Change If Needed

If you can, start with completely clean parts and new grease. Otherwise, greasing more often will flush out the old incompatible grease faster. Still, some joints will not flush, which could be risky.

Can you put too much grease in a bearing?

Overgreasing by applying too much grease to a bearing at one time can result in a seal failure and generate heat in the bearing housing. When too much grease is pumped into a bearing cavity, it eventually will become full. If there is no relief port on the housing, the grease will blow through the seals.

Leave a Comment