What is the edge guard on a Scotts spreader?

How do you determine spreader settings?

Can you spread too much fertilizer?

Applying too much fertilizer to your lawn will cause the nitrogen and salt levels in the soil to increase rapidly, which can damage or even kill the grass. When this happens, it is known as “fertilizer burn” and looks like yellow and brown strips or patches of dead grass.

What setting should Scotts spreader grass be set at?

Since settings will vary based on seed, it’s essential to verify this. For example, according to Scotts, the Scotts broadcast spreader settings for ryegrass seed should be set at setting 15 for new lawns and setting 5 for reseeding.

What do the numbers mean on a fertilizer spreader?

Understanding the Fertilizer Label

The first number is the amount of nitrogen (N), the second number is the amount of phosphate (P₂O₅) and the third number is the amount of potash (K₂O). These three numbers represent the primary nutrients (nitrogen(N) – phosphorus(P) – potassium(K)).

What setting should I use on my Scotts spreader for starter fertilizer?

Spreader Not Listed – Setting Tip: Set spreader at 1/4 to 1/3 of the dial as a starting point.

How do I fertilize my lawn with broadcast spreader?

Should I mow before fertilizing?

Ideally, you’ll want to mow and rake before fertilizing, so that excess lawn waste is removed and the fertilizer will have an easier time reaching the soil. Aerating your soil before fertilizing can also help; the best times to aerate are when your grass is actively growing, such as in spring or early fall.

Do you overlap when fertilizing?

There are a few other strategic patterns for proper fertilizer applications. As you apply in rows back and forth, approach the job as if you were vacuuming your carpet. Slightly overlap so as to be sure to not leave any gaps but not so much as to increase the number of passes you have to make.

Do you overlap with a broadcast spreader?

Your current pass should spread product so it overlaps by a couple of feet the edge of the pattern of product spread from the previous pass (25% overlap).

How do I prevent stripes on my lawn after fertilizing?

More specifically, the stripes are caused by not aligning the spreader as you make each pass. Most spreaders, either drop or broadcast, will have an “edge” where the fertilizer hits the lawn. These “edges” need to be aligned so that there is little overlap or gap between them.

How far does a Scotts broadcast spreader spread?

Up to 5,000 sq. ft.

How do you spread fertilizer evenly?

Can you touch fertilizer with your hands?

Touching the fertilizer may cause skin irritation, and ingesting it may be poisonous. Nitrates are the ingredients that cause the poisoning. Nitrates are a form of nitrogen that plants can easily absorb. Nitrogen is essential for plant growth, but it can be very dangerous when present at high levels in humans.

Can I spread fertilizer with my hands?

If you have no other way to do it, you can certainly spread it by hand. Just make sure to use gloves and apply it very carefully. Walk backward, throwing fertilizer out as you go in a sweeping motion. Of course, you can use water-soluble or liquid fertilizers with a hose too.

Will fertilizer stripes go away?

There you have it. Zebra stripes across your lawn are most likely the result of errors in your spreading technique. They can be fixed with care and attention, but better still is always prevention! Another way to ensure your lawn fertilization turns out precisely right is to call the experts at Cory’s Lawn Service.

Is lawn striping good?

Lawn Mowing Creates Those Coveted Stripes

Grass bent towards you looks dark while the grass away from you look lighter. Mowing your lawn and striping it is actually good for your grass! It can become healthier by striping. Mowing in the same pattern and same direction all of the time creates uneven spots and ruts.