A 28″ bar for a Stihl is listed as 3/8 Pitch, 0.050″, 91 Drive Links. All of Stihl’s 28″ factory chains to fit a 28″ bar are 91 Drive Links.
How many links does a 28 inch chainsaw have?
PowerCut™ Saw Chain, 28″, 92 drive links.
Table of Contents
What size of STIHL chain do I need?
Most STIHL homeowner chainsaws have a chain with a pitch that is either ¼” P or 3/8” P. Make sure the pitch you choose is the same as your chainsaw’s guide bar and drive sprocket – if it’s different, it won’t fit on the guide bar properly.
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.
How many drive links in a 28 inch STIHL chain? – Related Questions
How do I know what chain to buy for my Stihl chainsaw?
Do I have a 1/8 or a 3 32 chain?
How do I know what size my chainsaw chain is?
Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.
How do I find the size of my chainsaw chain?
To get a chain that is the correct size you need to count the drive links (those little teeth on the underside of the chain). One tip is to place a strip of tape on the first link and count your way around. You need to know exactly how many there are to get the correct chain size for your chainsaw.
How do I know what size chain I have?
Oftentimes the plates are stamped with chain size (i.e. 40, 08B, C2040, etc.). These can come in the form of numbers or letters stamped on the outside of the side plate and can help you to look up the full dimensions of your chain via manufacturer provided information.
With men’s chain necklaces, the general rule of thumb is that the thinner the chain, the shorter it should be, and the thicker it is, the longer it should be. With that being said, you can absolutely wear, say, an 8mm-thick 18” chain if you wanted to. You could also rock a 2mm-thick 26” chain.
What is the most popular chain size?
18-Inch Necklace Length
18-inch, or princess, necklaces are the most popular necklace length.
What happens if bike chain is too long?
A chain that’s too long (loose) may cause dropped chains and/or inconsistent shifting — front and back shifting. A chain that’s too short (tight) can cause even bigger problems.
What is the best length for a chain?
After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.
How do I know if my chain is the right length?
Check & Remove Chain
The chain should be long enough to make this shift with two slight bends at each pulley of the rear derailleur. Next, shift to the smallest chainring and sprocket. There should be no slack in the chain, and the derailleur should not pull so far back that the chain contacts itself.
Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style.
Which bike chains last the longest?
Shimano Bike Chain – Longest Lasting
These bike chains also have a SIL-TEC surface treatment on their inner and outer link plates, so you get a low-friction product that takes more time to wear and expire.
What causes bike chain to snap?
Shifting under a heavy load, such as when you are pumping hard on a climb, can cause extra stress on the chain and cause it to snap. Even ordinary pedaling while shifting can put stress on a chain. Shift before a climb and back off pedaling when you shift to avoid snapping your chain.
Why do bike chains keep falling off?
It might be that the chain is worn, has a stiff or bent link, or has become clogged up with dirt. A visual inspection while turning the cranks should reveal if there’s a problem here. The chainring, or a chainring tooth, could be bent. Again, a visual check will tell you what you need to know.
Why does my chain jump when I pedal hard?
These include worn out or misaligned derailleur pulleys, old or malfunctioning shifters throwing off the indexing in some gears, or broken/bent teeth on one or more cassette cogs. Build up of dirt and grime on drivetrain components will also cause shifting issues, including skipping chains.
We use technologies like cookies to store and/or access device information. We do this to improve browsing experience and to show personalized ads. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.