How can I tell what size my Stihl chain is?

If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.

How many links does a 28 inch chainsaw have?

PowerCut™ Saw Chain, 28″, 92 drive links.

How can I tell what size my Stihl chain is? – Related Questions

How many drive links for a Stihl 28 inch bar?

A 28″ bar for a Stihl is listed as 3/8 Pitch, 0.050″, 91 Drive Links. All of Stihl’s 28″ factory chains to fit a 28″ bar are 91 Drive Links.

Are .325 and 3 8 chains interchangeable?

Basically, it’s the size of, and spacing between links. For the same number of links, a 3/8” chain is longer. This also means that the shape of the sprocket at the motor and at the tip of the sword are different. 3/8” and 0.325” chains are NOT interchangeable.

How many drive links in a 28 inch Husqvarna chain?

Features 3/8-in pitch and 0.050 gauge. Chain is 28 inches long with 93 drive links.

How do I know how many drive links for my chainsaw?

Remove the chain and count the number of drive links.

Pop the chain off the bar in order to count the drive links. You’ll typically find somewhere between 66 and 72 drive links on a chainsaw chain. 16-inch bars typically have 66 drive links, while 18-inch bars usually have 72.

How many inches is a 72 Link chainsaw chain?

Amazon.com : Oregon 72 Drive Link Vanguard 3/8-Inch Pitch, . 050-Inch Gauge, Low Kickback Saw Chain 72V072G : Patio, Lawn & Garden.

Is a 22 inch chain too long?

Is a 22-inch chain too long? In general, no, a 22-inch chain is just a little longer than the average 20-incher. Chains at this length offer a more relaxed feel while providing enough breathing room.

What is 120 chain?

#120 chain is commonly referred to as “1-1/2″ pitch chain“. We offer this chain in standard, cottered, stainless steel, zinc plated and nickel plated.

Is 18 inch chain too long?

An 18in chain length is meant for smaller neck sizes. This is generally the shortest chain length for men. At this shorter length, necklaces tend to be very tight and fall right around the base of the neck. This can be a good option for men wanting their entire chain visible without being covered by a shirt collar.

What is the perfect chain size?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

What length chain looks best?

Standard (or princess) length necklaces (usually 45cm or 18″) are the most commonly worn length and will suit most situations. If you’re looking for a necklace or pendant to wear day to day, then this is likely to be your go-to length.

What happens if your chain is too long?

A chain that’s too long (loose) may cause dropped chains and/or inconsistent shifting — front and back shifting. A chain that’s too short (tight) can cause even bigger problems. Hopefully the bike just won’t shift into the largest cog or to the big ring …

See also  How do you put a drive belt on a CRAFTSMAN LT2000?

How thick is too thick for a chain?

If you’re going for a classic look, slimmer guys should go for a chain thickness of between 1mm to 3mm. Broader gents can go a bit bigger, between 2-6mm. For more details on this, check out our guide to different chain lengths, and this article about necklace sizes.

How long should a chain be over your head?

Opera length runs at 24″ long. Again, this is a length that has to be considered in relation to what you’re wearing, especially if it’s a chain with a pendant or charms. This length can fit over your head so can be a good choice if you like to take your jewelry on and off often.

Leave a Comment