Do I need permission to make a driveway?

You will not need planning permission if a new or replacement driveway of any size uses permeable (or porous) surfacing which allows water to drain through, such as gravel, permeable concrete block paving or porous asphalt, or if the rainwater is directed to a lawn or border to drain naturally.

Do I need permission to turn my front garden into a driveway?

You will need to request planning permission from your local highways department, and the results will vary depending on where you live and your council’s policy.

Do you need planning permission for permeable driveway?

If you’re using permeable materials you don’t need planning permission for driveways. But, what exactly are permeable materials? Put simply, anything that allows water to pass through is permeable – this includes gravel, porous concrete and asphalt and specially designed permeable block paving.

Do you need planning permission for resin driveway?

As resin bonded driveways are not permeable, they do require planning permission. Because of this, heavy rains can leave to run off which can overwhelm the drains and lead to flooding. Therefore, if you are planning to install a resin bonded driveway, planning permission must be sought.

Do I need permission to make a driveway? – Related Questions

Do you need planning permission for block paving?

You will not need planning permission if:

a new or replacement driveway of any size uses permeable (or porous) surfacing, such as gravel, permeable concrete block paving orporous asphalt.

What are the problems with resin driveways?

There are a number of things that can go wrong in the installation of a Resin Bound surface – we will highlight the most common issues and problems and advise you on how to avoid them. Common issues include unexpected rain damage, surface detachment or shading, reflective cracking and iron spotting.

What are the disadvantages of a resin driveway?

Get free, no-commitment estimates from experts near you.
  • They are more expensive than traditional driveways.
  • They can be difficult to repair if damaged.
  • They may not be suitable for all climates.
  • They can be difficult to clean and maintain.
  • Resin can be a health hazard if ingested.
  • They can be slippery when wet.

What goes under a resin driveway?

Tarmac and concrete are the most suitable bases for resin driveways. The Resin Mill’s permeable resin bound materials can be laid directly onto an existing tarmac surface if it is in suitable condition, or (after sufficient time), a newly installed one.

How deep should resin driveways be?

We recommend that a minimum 18mm depth be used.

This is so the surface achieves the required tensile strength for the application. Sand increases the strength of the Resin Bound surface by approximately 15-25% and will contribute to the anti-slip properties of the finished surface.

Does water pass through resin driveway?

A resin bound system is porous, allowing water to pass through the small gaps between aggregates and resin. Resin bound systems also bring other practical benefits: A smooth, flat finish.

What happens if resin driveway gets wet?

The materials MUST be installed on a dry day, if any rain or moisture gets into the resin before it has cured then you will start to see white patches blooming and the system will fail.

Can I jet wash a resin driveway?

The short answer is yes – you can jet wash a resin surface such as a resin bound driveway or patio.

Do weeds grow through resin driveways?

The short answer is no, a resin driveway if installed correctly should be weed resistant, no weeds should grow through the surface, however it is possible for seedlings in the air to land on the resin driveway and cause some growth.

How long does resin last on a driveway?

Resin Bound driveways are known to be long-lasting and durable surfaces. Guarantees can vary between 10-20 years. When properly installed and maintained it can last up to 25 years. A Resin Bound driveway requires minimal maintenance.

Is resin cheaper than paving?

Overall, resin surfaces work out cheaper in the long run too, as they’re virtually maintenance free in comparison to high maintenance block paving that needs regular weeding and power washing to keep it looking at its very best.

What type of driveway will last the longest?

Concrete, cobblestone, asphalt, brick, and interlocking pavers are the most durable driveway installation options available today. Apart from their lengthy lifespans, these materials also hold up well in any climate, require minimal maintenance, offer a smooth drive, and elevate your home’s first impression.

What are the two types of resin driveways?

There are a number of different types of resin for driveways on the market. There is UV stable polyurethane resin and then non-UV stable polyurethane resin. To segment that even further, these resins can vary in quality from one manufacturer to another. Non-UV stable resin is more economical than UV stable resin.

See also  Will a lawn sweeper pick up pine cones?

Do resin driveways add value?

Don’t let a perfectly picturesque property down with an imperfect driveway-replace it with resin! Adding between 5-10% to the value of a home, a driveway can drive up resale value immeasurably.

Leave a Comment