What year was the John Deere 345 made?

The John Deere 345, or JD345 for short, is one of the best garden tractors from Deere and Company. Released in 1995, this garden tractor is used by many homeowners with huge yards, as well as commercial properties maintaining golf courses and playing fields.

How long does a John Deere mower deck last?

From what we found, you can expect a John Deere mower to last between eight and ten years on average. That comes out to roughly 4,500-5,000 hours in its lifetime. Considering most riding mowers won’t last more than a few thousand hours, John Deere certainly stands out for quality.

Table of Contents

Are John Deere mower decks interchangeable?

So, are lawn mower decks interchangeable? Lawnmower decks are largely interchangeable. Engines will swap without issue. However, blades and drive systems may differ.

How do I identify my John Deere mower deck?

To find the ID tag on your push mower, look directly on the mower deck. If you’re looking for the engine number, it will be located directly on the engine. Locations for the engine number may vary depending on engine type and manufacturer.

What year was the John Deere 345 made? – Related Questions

Where is the part number on a mower deck?

Are the wheels on a mower deck supposed to touch the ground?

Mower deck gauge wheels should be properly adjusted to prevent scalping grass on uneven terrain. The bottom of the wheels should sit approximately 1/8-1/2 of an inch from the ground, depending on your cutting height.

How do you tell what size your mower deck is?

Chock the mower’s rear wheels to keep them in place, then raise the front of the mower by about 6 inches using a floor jack. Using your measuring tape, measure directly across the broadest part of the deck from one side to the other. Note your measurement.

What do the numbers on mower deck mean?

How do I find my John Deere part number?

Your part number can be identified by looking in your operators manual, under the seat of your lawn tractor (select models), accessing the maintenance reminder sheets or by carefully inspecting the old part and identifying the markings (Ex. GX20250).

See also  Why does my carburetor spit gas?

What size deck is on a John Deere?

Quality. The Edge™ Cutting System delivers an even cut no matter the size of your yard, with its 42-, 48-, or 54-inch mower deck sizes.

Should my deck be 16 or 24 center?

Deck joist spacing should never exceed 16″ on center (with the exception of MAX deck boards, which allow for maximum 24″ on center). For a more rigid feel, 12″ or less may be preferred. If adding additional framing, be sure to keep all boards level and in plane across the tops.

What is the most popular deck size?

What is the Average Size of a Deck? For most builds, decks are wider than they are deep, with the longer portion of the deck running alongside the house. According to landscapingnetwork.com, the average size is between 300 and 400 square feet. Decks can also be multi-level, adding more space and dimension to your home.

What size deck do I need for 2 acres?

Choosing a Riding Lawn Mower

As a rule of thumb, you need a 42-inch deck to mow two or more acres.

What is the easiest deck to build?

The easiest deck to build is an on-grade deck. It doesn’t require railings, stairs, or posts, but the essential elements of the deck—including the ledger, beams, piers, and joists—remain the same for all types of decks.

What is the average labor to build a deck?

The average labor cost to build a deck is between $8 and $22 per square foot. This makes up about half the total deck cost per square foot. At that rate, you might consider making your deck project a DIY. In this case, you can eliminate the labor costs and only have to pay the deck material costs.

Is it cheaper to build a deck yourself?

How much does it cost to build a deck? For basic deck designs using the least expensive lumber, you can expect to pay from about $8 to $10 per square foot (depending on the material) if you do the work yourself. You’ll pay about $30 per square foot if it’s professionally installed.

What is the cheapest way to build a deck right now?

Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs.

Is it cheaper to build your own deck?

Building your own deck will cost roughly half as much as if you hire a contractor. As with any DIY project, you’re only paying for materials, not labor. But the cost of materials varies widely based on the deck materials you choose and the shape and size of your deck.

Can you build a deck directly on dirt?

Yes, you can build a deck directly on the ground. There are many reasons to want a very low deck, including that at certain heights the deck may not require stairs or guardrails.

Leave a Comment