Designed for STIHL brushcutters and clearing saws, the FS Gearbox Grease is available in 40, 80 and 225 grams.
What type of grease is Stihl grease?
Multi-purpose grease designation:
0781 120 1110 (225 g tube)
How do you lubricate a Stihl trimmer?
What kind of grease do you use on a weed eater?
The Weed Eater company recommends using its brand of lubricant, but you can use any type of shaft lubricant.
What type of grease goes in a Stihl gas trimmer? – Related Questions
How often should I grease my Weed Eater?
The Stihl maintenance schedule for weed eaters recommends checking and filling the gearbox with grease after every 25 hours of operation to keep internal metal parts lubricated.
How do you grease a Weed Eater head?
How good is lithium grease?
Lithium-complex greases generally possess good stability, high-temperature characteristics and water-resistance properties. Other performance requirements like extreme pressure, anti-wear, rust and corrosion can further be improved by adding suitable additives.
What is bevel gear grease?
Product Description
A proven grease that lubricates the transmission and absorbs the axial forces. Environmentally compatible. Biodegradable.
What grease for gears?
White lithium grease has been the typical grease teams use for gears in FRC applications.
What grease should I use on my lawn tractor?
The following greases are preferred: John Deere Moly High Temperature EP Grease. John Deere High Temperature EP Grease. John Deere GREASE-GARD.
What grease for gears?
White lithium grease has been the typical grease teams use for gears in FRC applications.
What is bevel gear grease?
Product Description
A proven grease that lubricates the transmission and absorbs the axial forces. Environmentally compatible. Biodegradable.
Do all weed eaters use 2 cycle oil?
Recommended gas-to-oil ratios for common string trimmer brands:
| Manufacturer | Gas-To-Oil Ratio |
|---|---|
| ECHO | 50:1 |
| Husqvarna | 50:1 |
| Ryobi | 50:1 |
What oil ratio does Stihl weed eater use?
All STIHL gasoline-powered equipment uses a 50:1 gas and oil mixture.
Can I run a weed eater without oil?
All Weed Eater two-cycle products require oil to be added to the gas. Unlike engines that have separate gas and oil reservoirs, two-cycle engines run on a gas/oil mixture that keeps the engine lubricated at all times. Never use straight gas in a two-cycle engine as straight gas will ruin the engine within minutes.
Can I mix regular oil with gas for weed eater?
All Weed Eater brand two-cycle gas trimmers use a 40:1 ratio of gas to oil. That’s equal to 3.2 ounces of oil to 1 gallon of regular gas. The gas should be 87 octane with no more than 10 percent alcohol.
What happens if you put too much oil in a Weed Eater?
If there is too much oil in the mixture, it can cause excessive smoke in the exhaust, oil leaking from the filter and loss of power. Too little oil allows the piston and cylinder to become hot and destroys the engine. You must first remove the old fuel and oil mixture to replace it with the correct ratio.
How much 2 cycle oil per gallon of gas?
Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil.