What size bar can I put on my Stihl chainsaw?

How do I identify my Stihl chainsaw bar?

STIHL’s green and yellow color code system serves to identify STIHL bars and chains with different kickback reduction characteristics. Green (go) marks those products which are designed to reduce the risk of kickback injury and comply with the ANSI B175.

See also  What is the best way to water a pine tree?

How big of a bar can you put on a Stihl 250 chainsaw?

Available with 14″/35cm, 16″/40cm or 18″/45cm guide bars.

What do the numbers mean on a Stihl chainsaw bar?

The final set of numbers show how many drive links are in the chainsaw chain that will run on that specific bar. This bar has “72” stamped, so it would need a 72 drive link chain. Drive link count can range anywhere from 28 to 210 depending on your bar size. Finally there may be a letter found at the end of the bar.

What size bar can I put on my Stihl chainsaw? – Related Questions

How do I find the right bar for my chainsaw?

Measuring Your Chainsaw Bar

To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.

What length bar is best for chainsaw?

Typically a chainsaw with a shorter bar around 14” and smaller is enough for property maintenance, trimming, pruning, and cutting down broken tree limbs. On the other hand, cutting down small trees, thick branches, and cleaning up storm damage will need a longer bar around 16”-20” to make the job easier and safer.

How do you read a Stihl chain number?

If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The last three numbers (or letters) denote characteristics of the chain.

See also  What are the most common problems with zero turn mowers?

How do you read a chainsaw chain number?

What does H and La mean on a Stihl chainsaw?

They are typically labeled L (low speed jet), H (high speed jet), and I (idler jet).

What does C mean in Stihl?

To help you identify model features, look for these corresponding symbols: C = Comfort feature, E = Easy2Start™, Q = an additional chain braking system, R = wrap handle, and M = STIHL M-Tronic™.

What is the most sought after Stihl chainsaw?

Stihl MS 261 C-M Chainsaw (the Best Stihl Chainsaw for the Money) The Stihl MS 261 C-M chainsaw is made in the USA. It mirrors the fuel efficiency and low exhaust features of the MS 261 but adds Stihl’s M-Tronic engine management system.

What does Z mean in Stihl?

Without looking at the parts diagram, you can work out that the BG 56 & BG 56-Z will have different exhausts as ‘Z’ indicates that the machine has a spark arrest muffler. BROWSE ALL OF OUR STIHL PARTS & ACCESSORIES HERE.

What is winter mode on Stihl chainsaw?

Should you run a chainsaw at full throttle?

Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.

What does it mean when a chainsaw is 4 stroking?

Four-stroking is a condition of two-stroke engines where combustion occurs every four strokes or more, rather than every two.

Is there a break in period for chainsaws?

Typically we recommend a break in period of 6-10 tanks of fuel. During this period the engine should not be allowed to run at high RPMs for extended periods of time.

How do you store a chainsaw when not in use?

Store in a dry place

Your chain saw should be stored in a dry place. Choose a place which is well ventilated and protected from the weather. Keeping it outdoors is not advisable.

What angle should my chainsaw teeth be?

The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle. To maintain the correct angle, we recommend that you use a sharpening grid or a filing gauge as an aid.

Should a chainsaw blade be loose or tight?

The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it. The chain should snap directly into position.

Leave a Comment