# What setting should I put my fertilizer spreader on?

Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.

## What setting should I use on my Scotts spreader for starter fertilizer?

Spreader Not Listed – Setting Tip: Set spreader at 1/4 to 1/3 of the dial as a starting point.

## How do you calculate fertilizer spreader?

First, use the following formula to determine how much fertilizer is needed to apply 0.5 pound N per 1,000 square feet to the turf: pounds of N per 1,000 square feet desired for application ÷ percent of N in fertilizer (in decimal form) = pounds of fertilizer per 1,000 square feet.

What setting should I put my fertilizer spreader on? – Related Questions

## How do you calibrate granular fertilizer spreader?

1. Step 1: Measure Out The Proper Amount of Fertilizer.
2. Step 2: Measure Out A Test Area.
3. Step 3: Measure the Swath Width of Your Spreader. The swath is the area of coverage by your spreader when operating.
4. Step 4: Load the Spreader and Adjust Settings Following a Test Run.

## How much does a 50 lb bag of fertilizer cover?

A lawn will typically utilize 1 to 4 pounds of Nitrogen per 1,000 square feet per growing season. A 50 lb bag of fertilizer will typically cover 5,000 to 10,000 square feet.

## How many bags of fertilizer do I need for 1 acre?

Per-acre rates can likewise be converted to per-1,000 square feet by dividing by 43.5. 10 pounds of 10-10-10 per 1,000 square feet equals 10 x 43.5 = 435 pounds per acre.

## Are Scotts spreader settings lbs per 1000 sq ft?

per 5000 sq. ft. or 8 lbs per 1000 sq ft.

## How many pounds of fertilizer do you need per acre?

Determining Amounts of Fertilizer for Small Areas

## How many pounds can 1 acre produce?

Rocky and dry soil would produce less than fertile and moist soil. As examples of potential production capability one acre of land can produce as much as 42,000 pounds of strawberries, 25,400 pounds of potatoes, or 11,000 pounds of iceberg lettuce.

## How many 50 pound bags of fertilizer are on a pallet?

26-0-10 Award Turf Fertilizer 50 lb Bag – 40 per pallet.

## How much fertilizer do I need for a 1/2 acre food plot?

We recommend the equivalent of 300 pounds per acre.

## How many deer will a 5 acre food plot support?

Using this procedure, we come up with the following rules of thumb: 6.7 percent of the total acreage in food plots should support a deer per 5 acres; 3.3 percent should carry a deer per 10 acres; 2.2 percent, a deer per 15 acres; 1.7 percent, a deer per 20 acres.

## Can you fertilize and plant a food plot at the same time?

Fertilizer can be applied after planting with no problem. If you are like me, you can’t stand to drive over your plot after its been planted. But the benefits of the fertilizer will far outweigh the few plants you drive over and they generally pop right back up.

## Can you over fertilize food plots?

“In some cases, you could even damage your food plots.” Applying too much fertilizer can actually kill your food plots by feeding them too much. Excess fertilizer is also a major cause of poor water quality, as unused nutrients run off fields and into streams, rivers and lakes.

See also  How do you pulley swap a lawn mower?

## When should you not fertilize?

Do not apply fertilizer on an abnormally hot day, not even in the morning. Wait until the weather cools back down to a normal temperature. You can mow anytime after fertilizing with a granular treatment. With a liquid treatment, wait a day or two.

## Is triple 10 fertilizer good for food plots?

Many people assume they could just run to the local farm and feed store to pick up some bags of 10-10-10 or Triple 13 fertilizer to spread on their food plots. That’s definitely better than nothing, but it really only provides the three main nutrients: Nitrogen (N), Phosphorous (P), and Potassium (K).

## Is it better to over fertilize or under fertilize?

Whereas proper fertilization typically provides the lawn with nutrients that help it to grow greener and thicker (Nitrogen, Phosphorus, and Potassium), too much of a fertilizer product can actually harm or even kill your turf.

## Should I water after I fertilize?

At Master Lawn, we typically say to wait 24 hours before watering your lawn after fertilizing. But it is important to make sure that it does receive a good watering session soon after that 24 hour waiting period. Watering helps the fertilizer to activate and to break down and begin feeding nutrients to the lawn.