3. Apply the 10-10-10 slow-release fertilizer at a rate of 10 pounds per 1,000 square feet of lawn to provide the lawn with 1 pound of nitrogen. Do not exceed this rate. Position a fertilizer spreader over a sidewalk, driveway or other hard surface.
How often can you apply 10-10-10 fertilizer?
How Often to Use 10-10-10 Fertilizer. Liquid options can be applied to vegetables and ornamentals once a month to maintain a steady stream of nutrients. In well-composted soil, every other month is sufficient. Turfgrasses can use a triple 10 fertilizer 3 times per year, beginning in the spring.
What should I set my spreader at for fertilizer?
Set your spreader so that the opening(s) in the bottom are ¾ open when engaged. Put 6.5 pounds or 1/5 of a bag of Milorganite into your spreader. Begin fertilizing your lawn, starting along an edge, and continue until the spreader is empty. Leave the spreader where it was when it ran out of Milorganite.
What is Scotts spreader setting?
A spreader setting is the rate in which you apply product to your lawn.
What is the setting for 10-10-10 fertilizer? – Related Questions
How do I choose a spreader setting?
Calibrating Your Spreader
- Divide 100 by the square foot the bag of fertilizer covers.
- Multiply the weight of the bag by this number.
- The answer is the amount of fertilizer needed to cover 100 sq. ft.
- Place this amount in the spreader.
- Mark off a 10 ft. x 10 ft. area.
- Apply using the suggested setting.
What setting should Scotts spreader grass be set at?
Since settings will vary based on seed, it’s essential to verify this. For example, according to Scotts, the Scotts broadcast spreader settings for ryegrass seed should be set at setting 15 for new lawns and setting 5 for reseeding.
What do the numbers mean on a Scotts spreader?
The numbers stand for an application rate. A bag of commercial fertilizer will usually have numbers for where to set either broadcast or drop spreaders to get the recommended amount of fertilizer laid down.
What spreader setting should I use for Scotts EZ seed?
Put your EZ seed in the hopper, set your scotts spreader at the max setting and walk back and forth spreading it as evenly as possible.
What do the numbers mean on fertilizer spreaders?
Understanding the Fertilizer Label
The first number is the amount of nitrogen (N), the second number is the amount of phosphate (P2O5) and the third number is the amount of potash (K2O). These three numbers represent the primary nutrients (nitrogen(N) – phosphorus(P) – potassium(K)).
How do you use a Scott spreader?
Set the dial on the spreader and fill the hopper with product. Treat the perimeter of your lawn first, then steadily cover all areas of your yard going back and forth in straight lines. Make sure your passes overlap the product for even coverage.
Should I water after fertilizing?
At Master Lawn, we typically say to wait 24 hours before watering your lawn after fertilizing. But it is important to make sure that it does receive a good watering session soon after that 24 hour waiting period. Watering helps the fertilizer to activate and to break down and begin feeding nutrients to the lawn.
How do you fix stripes on fertilizer?
As light green stripes are usually the result of missed gaps in your application, it makes sense that you can get rid of them by filling in those gaps. The best remedy is to apply a small amount of fertilizer in these specific areas. Using a drop spreader will be preferable in this instance.
How do I fertilize my lawn with broadcast spreader?
Should I mow before fertilizing?
Ideally, you’ll want to mow and rake before fertilizing, so that excess lawn waste is removed and the fertilizer will have an easier time reaching the soil. Aerating your soil before fertilizing can also help; the best times to aerate are when your grass is actively growing, such as in spring or early fall.
Why is my lawn stripes after fertilizing?
These strips are caused by the misapplication of fertilizer. More specifically, the stripes are caused by not aligning the spreader as you make each pass. Most spreaders, either drop or broadcast, will have an “edge” where the fertilizer hits the lawn.
How fast should you walk when fertilizing?
The next thing to think about is walking speed, which most people tend to stay around three to three and a half miles per hour. Which, if I’m to equate that to a visual, I would say that it looks like a double-fast walk. Another key being that whatever speed you begin at, should be the speed that you finish at.
Is it better to fertilize at night or morning?
Fertilizing your lawn in the morning enables you to take advantage of cooler temperatures and morning dew to reduce the risk of burning the grass. As you spread the fertilizer and water it in, the nutrients will have the best chance of reaching the roots and being absorbed quickly.
Can you fertilize 2 weeks in a row?
Can I fertilize my lawn every 2 weeks? To avoid over-fertilizing, applying a fertilizer every two weeks is not recommended. Fertilizing as often as every two weeks will likely lead to problems such as lawn burn, excessive grass growth, as well as polluted water that can lead to toxic algae growth.
Should I fertilize before rain or after?
When is the best time to fertilize a lawn – before or after a rain? Too much rain could wash away the fertilizer before it has a chance to soak into the soil, so plan to fertilize several days before a heavy rain arrives or several days later.
Is morning Dew enough for fertilizer?
Early morning is the best time of day to fertilize your lawn. Fresh morning dew provides just enough moisture for your grass to absorb the fertilizer.