# What is the fuel mix for a Husqvarna trimmer?

As a general guide, a fuel / oil ratio of 50:1 is recommended in Husqvarna products up to and including 75cc. In certain heavy use applications, models above 75cc may be run on a mix of 33:1. Also consider; 50:1 (2%) with Husqvarna two-stroke oil.

## What is the fuel mixture for Husqvarna 128ld Weed Eater?

Use unleaded or quality leaded gasoline and two–stroke oil mixed at a ratio of 2% (1:50).

## How do you mix 50 to 1 gas Weed Eater?

This ratio is how much oil you need to mix into the gas for ideal performance. A 50:1 ratio, for example, means that you need 50 parts of gas for 1 part of oil. Different weed wacker models might have different suggested ratios, so always confirm the recommended ratio to keep your engine in good working order.

## What is a 50 to 1 ratio for gas and oil?

If your manufacturer recommends a 50:1 fuel/oil mix, it means you need 50 parts of gas to one part two-stroke oil. To mix one gallon of fuel at 50:1, add 2.6 ounces of two-stroke oil to one gallon of gas, as shown in the chart below.

What is the fuel mix for a Husqvarna trimmer? – Related Questions

## What is the mixing ratio for 2 strokes?

Use a 32:1 gasoline to oil ratio. One gallon of gasoline combined with 4 oz of two-cycle engine oil.

## How much oil do I need for a 50 to 1 ratio for 5 gallons?

For 5 gallons of gas, with a 50:1 ratio, the amount of oil required is 12.8 US ounces (100 ml). Experts agree that it is better to err toward the side of too much oil, rather than not enough.

## What happens if you use 50/1 fuel in a 40 1 engine?

Yes it will be fine. The actual ratio of the mix is 40 to 1 (40:1). Within limits you can always add extra oil to lower the ratio. Too much though and the spark plug can foul or the engine will smoke more than usual, too little can damage the engine.

## Does 40 to 1 have more oil than 50 to 1?

For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas. For a 32:1 mixture, use 4 fluid ounces of oil per gallon of gas.

## How much oil do I need for a 40 to 1 mix?

This ratio indicates how much fresh, regular unleaded gasoline (containing no more than 10% ethanol) to mix with how much oil. For all Remington 2-cycle products, the ratio is 40:1. This means you’ll want to add 3.2 oz of oil to every gallon of gasoline.

See also  What type of oil does a Kawasaki lawn mower take?

## Is pre mixed fuel worth it?

Pre-Mixed Fuel Burns Cleaner. Premium fuel is not only better for your equipment—it’s better for the environment, too. High-octane gas and high-quality, synthetic oil are odor-free and burn cleanly, so you can operate your two-stroke equipment worry-free.

## How long does Husqvarna premixed fuel last?

Purchase only enough fuel to last about 30 days. This helps assure that you are always using fresh, uncontaminated gasoline. For two-stroke engines, only mix enough fuel that will be used within the next 30 days. In order to store the fuel with as little exposure to air as possible, avoid containers with vent caps.

## What is the best 2 stroke premix?

Best 2 Stroke Oils Reviews
• Husqvarna 2 Stroke Oil.
• Klotz Super TechniPlate Synthetic 2-stroke Premix Oil.
• Lucas 2-Cycle Oil.
• Maxima 2-Stroke Oil.
• Quicksilver Premium Plus Outboard Oil.
• Motul 800 2T Factory Line 2 Stroke Engine Oil.
• Echo 2-stroke Oil.
• Red Line Two-Stroke Oil.

## Can you put premium gas in 2 stroke?

Gasoline that is 89 octane or higher is specifically recommended in engines that are two stroke and air cooled. Gasoline may contain a MAXIMUM of 10% Ethanol. Two stroke air cooled engines are approved to use a 87 octane rated clean gasoline in emergency situations.

## What fuel is best for 2-stroke?

Any fuel type between 87-octane and the 92-octane will work just fine depending on the type of motocross bike you own. If you own a 4 stroke, for example, the 82-octane works just fine, but for a 2-stroke, you should go for the ethanol-free higher octanes (92 and 93) because the lower octanes tend to detonate.

## What happens if you put unmixed gas in a 2-stroke?

Q: What would happen if you put regular unmixed gas in a 2 stroke engine? A: It soon seizes from lack of lubrication and becomes a NO stroke engine.

## What happens if you mix gas regular and premium?

Can I mix premium and unleaded gas? Yes, drivers can mix the two types of fuel. The combined gas types will result in an octane level somewhere in the middle — something the vehicle “will survive,” according to The Drive.

## Can you switch back and forth between regular and premium gas?

In short, yes, you can usually switch from premium to regular gas for a short time**. But if your car requires premium gas, then your engine may start to underperform. Many people get confused about the difference between premium and regular gas, so it’s hard to understand why some cars require one or the other.