What is equivalent to J20C?

The J20D specification is the cold-temperature equivalent to J20C.

What weight is Hy-Gard hydraulic oil?

Hy-Gard oil can be used in most applications calling for 10W-30 or 5W-30 engine oil for transmission and hydraulic oils. Note: Hy-Gard should be used in all applications calling for JDM J20C.

What grade of oil is Hy-Gard?

Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.

What is equivalent to J20C? – Related Questions

What viscosity is John Deere Turf-Gard oil?

Turf-Gard is formulated specifically for riding and walk-behind mowers, lawn tractors, and other grounds- care equipment. Available in 10W-40, 10W-30, and 5W-30. Plus-4 is recommended for autos and trucks with gasoline engines, no matter what make or model.

What is the grade of hydraulic oil?

Based on their viscosity index, hydraulic oils can be: Monograde hydraulic oils are classified by their viscosity at hot ambient temperatures (SAW 10, SAE 20, SAE 30, etc.) or during winter (SAE10W, SAE20W, etc.). The number stands for the viscosity level at a specific temperature.

What grade is tractor hydraulic oil?

Universal Tractor Hydraulic Fluid is a SAE viscosity grade 10W-30 and meets API GL-4 gear oil specifications. FORMULA 500® Universal Tractor Hydraulic Fluid should not be used where a Caterpillar TO-4 fluid is required.

What is 140 grade gear oil?

Gear Oil 140 is a premium, heavy duty, mineral automotive gear oil manufactured with modern extreme pressure additives and friction modifiers meeting the requirements of API GL-5/6 and MT-1 as well as many other manufacturer specifications.

Is SAE 30 same as hydraulic oil?

“It is a common practice in the construction and mining industries to use engine oil SAE 10, SAE 20 or SAE 30 with the lowest API rating as a substitute for hydraulic oil ISO 32, ISO 46 or ISO 68, respectively for hydraulic systems of heavy equipment.

Can I use motor oil instead of hydraulic oil?

Engine oil can work satisfactorily as a hydraulic fluid. However, if a multigrade engine oil is being used in the hydraulic system specifically for its high viscosity index (VI), then it’s not the correct solution. The reason is the additives used to improve viscosity index.

Can I use ATF instead of hydraulic fluid?

Most hydraulic systems will operate satisfactorily using a variety of fluids. These include engine oil, automatic transmission fluid and oil formulated specifically for the hydraulic compartment.

Can you use power steering fluid for hydraulics?

To answer the original question- Yes, Power steering fluid can be used in a hydraulic jack.

Can you use DOT 3 for hydraulic fluid?

Brake and Clutch Fluid DOT 3 is a high quality, non-petroleum automotive brake fluid designed for use in conventional hydraulic brake and clutch systems under normal service conditions.

What is the viscosity of ATF?

The Viscosity Index of the ATFs varied between 146 and 180. Addition of the Protectants decreased the range insignificantly to 147 to 178. The wear protection properties of the fluids were tested by the Four-Ball wear method, ASTM 4172.

Is Dexron VI low viscosity?

TRIAX Transyn Dex VI ATF is a full synthetic, extremely long life, low viscosity automatic transmission fluid designed for high performance GM and Ford automatic transmissions. This product is designed to offer exceptional protection for transmissions, low operating temperature and high resistance to shear.

What is the viscosity of Dexron?

Performance Specifications
TYPICAL PROPERTIESATF
DENSITY KG/L@ 15°C0.855
KINEMATIC VISCOSITY CST @ 40°C37
KINEMATIC VISCOSITY CST @ 100°C7.3
VISCOSITY INDEX (D2270)173

What is the viscosity of Dexron 6?

Property
Property
Color, VisualRed
Flash Point, Cleveland Open Cup, °C, ASTM D92220 (428)
Kinematic Viscosity @ 100 C, mm2/s, ASTM D4455.83
Kinematic Viscosity @ 40 C, mm2/s, ASTM D44529.5

1 more row

Leave a Comment