Featuring a universal power train, this yard care system accepts a wide range of attachments. The MM55 cultivator weighs 20.9 pounds has a powerful 27.2 cc engine that rotates the tines at 200 rpm and cultivates 8.5″ wide. Features include: Compact design (handle easily folds) Multi-Function control handle.
How many cc is a Stihl MM55?
Made in America
POWER SOURCE
Gas
PICK TINE DIAMETER
9.1 in.
ENGINE POWER
1.14 bhp
FUEL CAPACITY
11.5 oz.
DISPLACEMENT
27.2 cc
How do you start a Stihl MM 55?
Depress the throttle trigger lockout button, then the throttle trigger button. Hold them both down while you shift the slide control to the “start” position. Let go of the throttle trigger, then the slide control and then the throttle lockout button. The throttle is now in the “start” position.
Do you start a Stihl chainsaw with the brake on?
For example, always engage the chain brake before starting the engine, and if your saw has a purge pump primer feature, “pump it a few times to move fuel from the tank to the carburetor.”
What is a Stihl MM55? – Related Questions
Is there a trick to starting a Stihl chainsaw?
Should I start chainsaw with brake on or off?
When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What makes a Stihl chainsaw hard to start?
#1 Dirty carburetor
This is easily the top culprit. In fact, anytime I run into a chainsaw, string trimmer, lawn mower or other small engine that won’t start, is hard to start or runs poorly, I suspect a dirty carburetor first – and it’s usually the case. Gasoline begins to break down in as few as 30 days.
How many pulls should it take to start a chainsaw?
With the choke in the “off” position, pull the engine’s crank cord through again. The engine should start in 1 to 3 pulls. Try it first without using the throttle control—unless recommended by the manufacturer.
What is the easiest Stihl chainsaw to start?
Do you throttle when starting chainsaw?
Pull the starter handle until the engine fires. Push the choke (half-throttle) and pull again until the saw starts. Accelerate (rev) so that the engine idles and then release the chain brake.
How do you start a chainsaw that’s been sitting for years?
Chainsaws are commonly used tools, but sometimes they don’t get used for a long time.
Subscribe to Thriving Yard!
Take off the gas tank lid.
Put a few BBs inside the gas tank.
Put on the gas tank lid.
Shake chainsaw vigorously.
Take off the gas tank lid.
Pour out BBs and old gas.
Flush out gas tank with cleaner.
How do you turn on a Stihl fs55?
Press the throttle trigger lockout and hold it down. At the same time press the throttle trigger until the detent engages with the tab on the housing. When the throttle trigger is engaged, first release the throttle trigger and then the throttle trigger lockout. The machine is now in the starting throttle position.
How do you start a Stihl fs50?
How do you start a Stihl f5 56 RC?
How do you turn a Stihl on?
With all gas-powered STIHL trimmers, you begin the starting procedure by pressing the fuel pump bulb at least 5 times.
This is easily the top culprit. In fact, anytime I run into a chainsaw, string trimmer, lawn mower or other small engine that won’t start, is hard to start or runs poorly, I suspect a dirty carburetor first – and it’s usually the case. Gasoline begins to break down in as few as 30 days.
How do I start my STIHL chainsaw after sitting?
Just let the saw sit for 30 min and the excess gas will evaporate. Remove the spark plug, dry it, crank over the engine a few times to dry the cylinder. Now refit the plug and try again. Set the switch to “On”, set throttle to fully open, set choke to “Off” and crank over the engine.
How do you start a STIHL chainsaw without flooding?
Should I start chainsaw with brake on or off?
When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
Why does my Stihl chainsaw dies when I give it gas?
The reason for this is usually some clogging in the carburetor or in some other area that resists the flow of air and fuel. To overcome this you should check the filters and if there is any thick oil deposited on the surface. Clean the filters and oil tank and that’s all. Your chainsaw would not die now.
We use technologies like cookies to store and/or access device information. We do this to improve browsing experience and to show personalized ads. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.