Is Lesco a good grass seed?

The Lesco Seeds also has the best germination rate (90%) of all major brands and produces a lush dark green turf. Save yourself some money and go with Lesco Transion Seeds. Finally have a green yard! Last year I seeded with a local facilities grass seed “guaranteed” to grow grass.

How do you put down starter fertilizer?

Pour the required amount into a standard fertilizer spreader and evenly apply the starter fertilizer over the planting site. Once applied, work the product 4 to 6 inches into the soil.

What is Hydromulch seeding?

What is Hydromulch? Hydromulching, which is sometimes also called hydroseeding or hydraulic mulch seeding, is a method of planting grass in which a mixture of water, fiber mulch, tackifier (an adhesive substance), and seeds are sprayed over an area to prevent soil erosion and promote re-vegetation.

See also  What setting should my lawn spreader be on?

Is Lesco a good grass seed? – Related Questions

What are the disadvantages of hydroseeding?

No cost savings on small yards: While hydroseeding is a cost-saving choice for large areas, the initial time and expense of getting the hydroseed machine set up means that you don’t save much money on small lawns.

Is hydroseeding better than seeding?

Hydroseeded lawns grow faster than traditionally seeded lawns, thanks to the fertilizer in the slurry mixture. But similar to a traditionally seeded lawn, it can take about one year for the lawn to become thick and dense.

What is the difference between hydroseeding and Hydromulching?

Hydroseeding is a method of applying seed, fiber, tackifier and other materials, such as fertilizer, on disturbed soil areas via hydraulic spray rig. Hydromulch is similar to Hydroseed, only no seed is applied.

Does Hydro seeding work?

Hydroseeding is an effective means of quickly establishing ground cover and erosion control over large areas for both commercial use and residential use. It’s commonly used to quickly vegetate large open areas of bare soil and create beautiful residential lawns.

What is Hydromulch used for?

Hydromulch is often used as an erosion control technique on construction sites as an alternative to dry mulches. Seed and fertilizer can be added to the slurry to hyrdoseed areas that may not be accessible to traditional seeding equipment.

What is the purpose of hydroseeding?

Hydroseeding is a mechanical method of applying seed, fertilizer, and mulch to land in one step. Hydroseeding typically consists of applying a mixture of wood fiber, seed, fertilizer, and stabilizing emulsion with hydro-mulch equipment, which temporarily protects exposed soils from erosion by water and wind.

See also  Can I put a bigger bar on my Stihl MS170?

What time of year is best for hydroseeding?

Late summer/early fall is optimal, as the temperatures continue to fall and the precipitation increases. The spring and fall allow for faster growth than in cold and hot seasons, but won’t require as much water as a lawn that began in the drier summer season.

Do you need topsoil for hydroseeding?

Add topsoil to achieve a total topsoil depth of 4-6 inches (10-15 cm), after firming. The soil type should be loamy compost mix. Dark nutrient rich topsoil provides a fertile soil environment for the top 8 inches of soil. If timing allows, conduct a soil test.

Do I need topsoil before hydroseeding?

The soil must be properly prepared before hydroseeding, though, and rolling the topsoil is one step in that process. The best time to hydroseed is in the fall or spring to allow the grass to grow without the heat of summer, recommends Clark’s Landscape.

How cold is too cold for hydroseeding?

Most grass seeds are technically capable of germination in temperatures as low as 48 degrees fahrenheit. However, when soil temperatures drop below 55 degrees fahrenheit, germination will generally be much slower.

What time of day should I water hydroseed?

New hydroseed should be watered 3 times per day for approximately 10-20 minutes per watering cycle. The ideal times are 4:00AM, 11:00AM, and 4:00PM. (Do not water after dark)

Can you hydroseed a patchy lawn?

To quickly transform your lawn’s brown patches into lush green grass, try hydroseeding, a landscaping process that makes seeding a lawn a whole lot easier.

Should I fertilize before hydroseeding?

Fertilizing. Your lawn should be fertilized about 30 days after being hydroseeded and again in another 30 to 45 days. Apply fertilizer when the lawn is dry and then water thoroughly. Use a balanced fertilizer such as 16-16-16 or a starter fertilizer, following label instructions carefully.

Leave a Comment