How much horsepower do I need for a bush hog?

Designed with the unique requirements of tractors with 40 PTO HP and under in mind, these implements may be smaller in size, but they have a big heart.

What height do you set a bush hog?

How many horsepower is a 10 foot bush hog?

Comparison 10′ Smooth Deck Flex-Wing Brush Cutters
BrandBush-WhackerBush Hog
Cutting Capacity4″3.5″
Deck Thickness7 Gauge/12 Gauge11 Gauge
Side Skirt Thickness3/8″1/4″
Divider Gearbox HP275 HP235 HP

How thick of a tree can a brush hog cut?

To recap, a brush hog can cut saplings. Most brush hogs will cut softwoods as thick as 3″ (7.62 cm) and hardwoods up to 1.5″ (3.81 cm) in diameter.

Can you reverse with a bush hog?

Bush Hog® Gear-Drive Rotary Tillers

The gear-driven “ROTO HOG” are built Bush Hog® tough for years of dependable service. Available in standard or reverse till, there is a model that will fit your application.

How much horsepower does a 12 foot bush hog have?

A lighter-duty 12-foot unit works well on utility tractors of 50 to 80 hp. The popular 15-foot models work best on tractors 75 hp. and up. The 20-foot models require higher horsepower and are used more by road crews and farmers in the Northern Plains.

How much horsepower does a 12 ft bush hog need?

The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO horsepower of 50 to 75. The narrow cutting width of 12-feet makes this Flex-Wing ideal for rolling terrain where a wide rigid cutter will not perform as well.

How much horsepower do I need for a 8 foot bush hog?

Comparison 8′ Brush Cutters
BrandBush-WhackerBush Hog
Deck Thickness7 Gauge/12 Gauge10 Gauge
Side Skirt Thickness1/4″1/4″
Divider Gearbox HP120 HP120 HP
Spindle Gearbox HP100 HP90 HP

How much horsepower do I need for a 7 foot bush hog?

250 HP 190 HP

What time of year should you bush hog?

Most homesteaders bush hog during the middle to the late weeks of summer when weeds begin to appear in pastures and fields. The quality of land being worked, climate, and seasonal weather may require two or even three brush hogging sessions – or as few as one.

See also  Why is my Troy Bilt mower not starting?

Should you sharpen the blades on a bush hog?

You should sharpen your bush hog blades whenever you notice the bush hog is not cutting properly, or becoming heavily clogged with torn debris. A dull blade will pull tough stalks instead of cutting them, and they could wrap around the output shaft of the gearbox and ruin the seal in the gearbox.

What is the toughest bush hog?

Bush Hog® 4815 Flex-Wing Rotary Cutter

The 4815 is simply the toughest Bush Hog® built Flex-Wing… ever. Designed for the most-demanding, roughest applications, the 4815 is designed for those users who require the strongest 15 ft. Flex-Wing to tackle the most extreme jobs.

How much does a 15 foot bush hog cost?


How many acres can you bush hog in an hour?

A 6 ft deck with a decent, slow but steady tractor can do about 2 acres an hour. I would suggest that you don’t go fast if you are cutting mixed brush.

What RPM should you bush hog at?

To brush hog, all you do is engage the PTO. It may be button or lever activated if fully independent. On certain tractors, however, you may have to push the clutch down and move a lever, then gradually let up on the clutch. You want to be between 1200 and 1600 RPM’s when turning the PTO on.

What do you do after you brush a hog?

mow over the area a second time with the brush hog to finely chop, hastening natural decomposition, and simply leave it on the ground. lift larger piles of debris using a front end (or bucket) loader or Skid Steer with a bucket attachment. use a tractor-attached landscape rake (or rock rake) to pile debris.

See also  Is big dog a good mower?

How often do you grease a bush hog?

Failure to grease your shaft regularly or as outlined in the PTO shaft’s maintenance schedule could result in end thrust potentially destroying the implement’s gearbox. It is recommended to grease standard universal joints every 20 hours or 8 hours for severe conditions.

Can you bush hog with a lawn tractor?

What size tractor do I need for a 5 foot bush hog?

For example, if you have a tractor rated for 50 HP, then you should purchase a model in the 40 to 50 HP range! The horsepower of your tractor will also influence the deck width you should purchase. Typically a 25 HP tractor can handle deck widths up to 5 ft, for instance.

Leave a Comment