How do you use Scotts Turf Builder DLX?

Fill hopper with Scotts(R) lawn fertilizer or grass seed. Turn orange rate dial to the desired “Broadcast/Rotary Spreader” setting listed on the back of each Scotts(R) product. To apply product begin walking, then squeeze and hold trigger.

How do you calibrate Scotts Turf Builder Edgeguard DLX?

How do you use a Scotts Edgeguard DLX spreader?

How do you use Scotts Turf Builder DLX? – Related Questions

What setting should I set my spreader?

Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.

How do I calibrate Scotts Deluxe spreader?

What should I set my spreader at for fertilizer?

Set your spreader so that the opening(s) in the bottom are ¾ open when engaged. Put 6.5 pounds or 1/5 of a bag of Milorganite into your spreader. Begin fertilizing your lawn, starting along an edge, and continue until the spreader is empty. Leave the spreader where it was when it ran out of Milorganite.

What is the EdgeGuard on a Scotts spreader?

How do you set a Scotts broadcast spreader?

What is Scotts spreader setting?

A spreader setting is the rate in which you apply product to your lawn.

What number do you set Scotts fertilizer spreader?

Spreader Not Listed – Setting Tip: Set spreader at 1/4 to 1/3 of the dial as a starting point.

What do the numbers mean on a Scotts spreader?

The numbers stand for an application rate. A bag of commercial fertilizer will usually have numbers for where to set either broadcast or drop spreaders to get the recommended amount of fertilizer laid down.

Is a drop or broadcast spreader better?

Drop spreaders are particularly valuable when you must be precise in the product’s release, whereas a broadcast spreader’s main function is to efficiently broadcast in all directions. Drop spreaders will also make sure you don’t waste any product as you’re spreading.

See also  How do you bypass the safety switch on a Snapper riding lawn mower?

Do you overlap with a broadcast spreader?

Your current pass should spread product so it overlaps by a couple of feet the edge of the pattern of product spread from the previous pass (25% overlap).

How fast do you walk with a drop spreader?

What is Correct? Homeowner spreaders are generally calibrated to deliver the correct rate and pattern at a walking speed of 2.75 mph. Professional spreaders, which are more likely to be pushed by physically fit young males, are typically calibrated at 3.0 mph.

Can you top dress with a broadcast spreader?

You can also use a broadcast spreader that has the technology to spread topdressing evenly on lawns. You may still need to do some raking, whether you use a drop or broadcast spreader.

What is the best top dressing for lawns?

Compost. Compost is the best soil for top dressing your lawn. It is rich in nutrients that your turf needs for growth. Your lawn will benefit a lot from the organic matter found in compost, provided it is finished and has fillers mixed in.

What is the best way to Topdress a lawn?

Apply a thin layer of the organic soil mixture over the area of your lawn. To do this, shovel the top dressing into even piles around the area of lawn and then rake the mixture into the lawn until it looks as if the lawn has been lightly dusted.

Leave a Comment