How do you change the drive belt on a big dog Alpha MP?

How long is a 954 04062 Belt?

Description. MTD 954-04062 Exact Replacement Belt Measures 1/2-Inch by 77 1/2-inch.

How do you change the drive belt on a big dog Alpha MP? – Related Questions

How long is a 44 belt?

Men’s Belt Sizes
Numerical Belt Size3044
Belt SizeXSXL
Waist in inches26½-2840½-42
*Length in inches28-3043-44

What length is an a 85 belt?

SIZE to ORDERBody measurement Waist in cmFastens at the middle hole of 5 holes, leaving two spare either side. Approx.
12 / M7576cm / 30”
14 / L8081cm / 32”
16/ XL8586cm / 34”
18 / XXL9091cm / 36”

How long is Deck Belt on 42 inch John Deere?

Belt length (in.)103.7 42 in.
Fits Deck Size (in.)42 in.42
Product Depth (in.)5.95 in1.6 in
Product Width (in.)15.2 in

How long are the belts on a 569 John Deere baler?

7” 524”

How long is a A52 belt?

52– 52 inches is the inside circumference of the belt. For A-section v-belts, the outside circumference is found by adding 2 inches to the inside length of the belt. So, the outside circumference of the A52 belt is 54 inches (52+2).

How long is a 52 inch Deck Belt?

Ariens 52-in Deck Belt for Zero-Turn Mowers (1/2-in W x 15.5-in L)

What is the length of a drive belt?

Because most automotive v-belts are roughly 3/16-inch in depth, this must be compensated for in order to come up with an outside circumference. The rule of thumb is to add 1½ to 2 inches to the inside circumference measurement. Our setup demanded a belt between 57½ and 58 inches in length.

See also  How long do you let a baby cry it out?

How can you tell how long a belt is?

Start the tape measure at the hole you currently use and measure to the end of the belt, where it meets the buckle (not the end of the buckle). Belts are measured in inches and you should round up to the nearest inch. If you measure 36 inches, you will want to purchase a size 36 belt.

Is there a difference between a Deck Belt and a deck drive belt?

Both play a role in making the blades turn. The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before.

What are 3 types of drive belts?

There are three types of drive belts:
  • Serpentine Belt. A serpentine belt is located under the hood of a car, and it “snakes” its way between various pulleys and accessories.
  • V-Belt. A V-belt runs off a crank and pulley and typically travels between one or two engine accessories.
  • Timing Belt.

What are three types of belt drives?

These five types are:
  • Round belt.
  • Flat belt.
  • V belt.
  • Toothed belt.
  • Link belt.

How do you measure a drive belt for a lawn mower?

How are drive belt sizes measured?

The most accurate way to measure the circumference of a v belt is with a v belt measuring tool or using a cloth tape measure (Not a steel tape measure or ruler). An additional option is to wrap a small diameter string/rope around the belt, then measure the length of the string.

See also  What is Kylie's baby's name new?

How do you read a drive belt size?

Automotive belts start with either 4L (12.5mm wide) or 3L (9.5mm). The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside.

What size belt fits a 42 inch mower deck?

x 96-5/8 in. for 42 in. Deck Riding Mowers, Fits Cub Cadet, MTD, John Deere and more (R-75-813)

What size is a 42 inch belt?


Leave a Comment