The model number, serial number, and specification code on a vertical engine are located on a silver decal attached to the blower housing on the side of the engine cover.
What oil does a Kohler 17 hp engine take?
Kohler recommends 10W-30 oil for its engines, including Command, Command Pro, CS, Courage, Aegis and Triad OHC engines, when the piece of equipment is in an environment where the temperature is above 32 degrees F.
How do I identify my Kohler K series engine?
The model number, serial number, and specification are located on a silver decal attached to the side of the engine cover. You will need this information when ordering parts or to be able to use our parts diagrams.
How much oil does a 17 hp Kohler engine take?
31.5 ft lb peak torque. 8.5:1 compression ratio. 79 pounds dry weight. 1.6 quart oil capacity.
How do I read my Kohler engine model number? – Related Questions
What is the best oil to use in a Kohler engine?
WHY KOHLER OILS? *Although 10W-40 engine oil is the recommended oil for most conditions, the oil viscosity may need to be changed to accommodate seasonal temperature changes. Using 20W-50 oil in higher ambient temperatures may reduce oil consumption.
How often should you change oil on a Kohler engine?
The engine crankcase oil and the filter must be changed after every 300 hours of operation.
How much oil does a Briggs & Stratton 17 and a half horsepower motor hold?
Specifications
Series: |
Power Built |
Oil Capacity: |
48 oz. |
Recommended Use: |
Lawn Mowers, Riding Mowers, Tow-Behind Mowers |
L x W x H |
18.9 x 15.5 x 12.9 in |
Shipping Weight: 3005 |
79.7 lbs. |
How much oil does a Briggs and Stratton 17 hp engine take?
How much oil does a 17 Maxima take?
Capacity: 5.1 quarts (with filter). After refill check oil level.
How much oil does a Kohler cv740 take?
747 cc (46 cu. in.) Oil Capacity (refill) 1.6-1.8 L (1.7-1.9 U.S. qt.) Kohler engine identification numbers (model, specification and serial) should be referenced for efficient repair, ordering correct parts, and engine replacement.
Should I use synthetic oil in my lawn tractor?
When choosing lawn mower oil, use a high-quality detergent oil classified as “For Service SF, SG, SH, SJ” or higher. Do not use special additives. Synthetic oils are an acceptable oil at all temperatures. The use of synthetic oil does not alter required oil change intervals.
Can I use regular SAE 10W30 in my lawn mower?
10W30 is a common motor oil grade suitable for many lawn mowers. Your owner’s manual will tell you the exact grade required, but in almost all cases 10W30 is the right stuff for a four-stroke engines. Any brand of oil that’s suitable for cars or trucks will work fine in your mower.
Can I use SAE 30 instead of 10W30 in my lawn mower?
Basically, SAE 30 works great in older mowers, but most newer mowers call for 10w30. SAE 30 is also better in warm conditions while 10w30 can accommodate colder ones as well. Aside from these factors, be sure to consider what the manufacturer recommends for your lawn mower.
Can I use 20W50 instead of 10w30 in my lawn mower?
The short answer is yes, you can use 20w50 oil in a lawnmower but results may vary. That’s not the end of it though. This kind of oil is not designed specifically to be used in a lawnmower. 20W50 is actually a fairly specialized petrol engine oil formulated for use in engines made generally before 1980.
Is it OK to mix motor oil weights?
Can oils of different grades be mixed? The good news is that mixing different types of oil it will not harm your engine in any way in the short run. Most synthetic and semi-synthetic engine oils are based on regular oil and are compatible.
Is it OK to mix SAE 30 and 10w30?
So, can you mix SAE 30 and 10w30? The answer is yes; you can combine these two types of oil. According to thespruits.org, mixing oils with the same viscosity levels is okay. However, it is essential to remember that SAE 30 is a lighter-weight oil, and 10w30 is a heavier-weight oil.
What happens if I put 10W30 instead of 15w40?
Since 10W-30 is thinner than 15W-40, its film strength can be weaker and it can be more prone to oxidation. Therefore, high quality additives are needed to compensate for those weaknesses in order for 10W-30 to protect as well and last as long as 15W-40.
What happens if you mix SAE and synthetic oil?
So, can you mix synthetic oil with regular oil? Yes. If it’s something you do only occasionally, mixing shouldn’t damage your engine. Let’s say you want to top off your oil, just to keep you rolling until your next regularly scheduled maintenance check.