Lawnmower decks are largely interchangeable. Engines will swap without issue. However, blades and drive systems may differ.
Are the wheels on a mower deck supposed to touch the ground?
Mower deck gauge wheels should be properly adjusted to prevent scalping grass on uneven terrain. The bottom of the wheels should sit approximately 1/8-1/2 of an inch from the ground, depending on your cutting height.
Should the front of the mower deck be higher than the back?
For most effective results, a lawn mower deck should have a pitch of 1/8-inch to 1/2-inch between the height of the deck rear to the height of the deck front. Naturally, this makes the sweet spot about 1/4-inch of pitch, depending on the type of mower.
What size belt for a CRAFTSMAN 42 inch deck?
CRAFTSMAN 42-in Deck/Drive Belt for Riding Mower/Tractors (1/2-in W x 13-in L)
Are CRAFTSMAN 42 inch mower decks interchangeable? – Related Questions
How many blades does a 42 inch deck have?
2 blades are required for a 42″ cut deck. This blade replaces Poulan/Craftsman 134149 and 532134149; Husqvarna 532 13 41-49.
Is there a difference between a deck belt and a deck drive belt?
Both play a role in making the blades turn. The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before.
How long does a mower deck belt last?
There is no specific time length that mower belts need to be replaced. Some belts may last longer than others due to different operating conditions. One thing is for certain though, the more the mower is used, the sooner you will need to consider replacing the mower belt.
Can a deck belt be to tight?
Having the correct belt tension is super important simply because if it’s too loose, it will damage the belt, and having it too tight will damage the pulleys and the belt.
Why do I keep breaking deck belts?
A common cause of belt breakage is excessive grass clippings on the deck. Grass clippings can work their way under pulleys and deck covers, causing series problems. Make sure to clean off your deck after every mower use and follow manufacturer recommendations.
How long is 42 deck CRAFTSMAN belt?
CRAFTSMAN 42-in Deck Belt for Riding Mower/Tractors (0.53-in W x 96.5-in L)
What size belt for a 42 inch mower deck?
x 96-5/8 in. for 42 in. Deck Riding Mowers, Fits Cub Cadet, MTD, John Deere and more (R-75-813)
What size belt do I need for a 42 in?
How to Determine What Size Belt to Order
| Pants Size |
Belt Size OWB |
Belt Size IWB |
| 42 |
46 |
47 or 48 |
| 43 |
47 |
48 or 49 |
| 44 |
48 |
49 or 50 |
| 45 |
49 |
50 or 51 |
How long is a 42in Deck Belt?
A: The belt length is 113.1 inches.
Can a Deck Belt be to tight?
Having the correct belt tension is super important simply because if it’s too loose, it will damage the belt, and having it too tight will damage the pulleys and the belt.
How long does a Deck Belt last?
There is no specific time length that mower belts need to be replaced. Some belts may last longer than others due to different operating conditions. One thing is for certain though, the more the mower is used, the sooner you will need to consider replacing the mower belt.
Do deck belts stretch?
Yes! Over time a lawn mower belt can stretch, although breakage is more common. When used for long enough, as it’s placed under tension, the belt may become elongated to the point that it’ll no longer stay in place when installed on the pulleys.
How do I know if my belt tension is correct?
How often should you change a mower belt?
There’s no definite amount of time that a mower belt is supposed to last, but increased mower use shortens the interval in which a belt needs replacement. Simply put, more use equals more wear. Additionally, faulty belts or mechanical failures like a seized pulley can make lawn mower belts break prematurely.