Are CRAFTSMAN 42 inch mower decks interchangeable?

Lawnmower decks are largely interchangeable. Engines will swap without issue. However, blades and drive systems may differ.

What size is a 42 in Deck Belt?

Belt length (in.)89.3842 in.
Fits Deck Size (in.)42 in.42
Product Depth (in.)0.4788.24
Product Width (in.)0.5

What size is a CRAFTSMAN 42in Deck Belt?

CRAFTSMAN 42-in Deck Belt for Riding Mower/Tractors (0.53-in W x 96.5-in L) in the Lawn Mower Belts department at

What size belt does my 42 inch CRAFTSMAN mower take?

CRAFTSMAN 42-in Deck/Drive Belt for Riding Mower/Tractors (1/2-in W x 13-in L)

How do you tell what size your mower deck is?

Chock the mower’s rear wheels to keep them in place, then raise the front of the mower by about 6 inches using a floor jack. Using your measuring tape, measure directly across the broadest part of the deck from one side to the other. Note your measurement.

How long is a CRAFTSMAN 54 inch Deck Belt?

CRAFTSMAN 54-in Deck Belt for Riding Mower/Tractors (11/16-in W x 20.75-in L)

How long is the Deck Belt on a CRAFTSMAN LT1000?

Rinlius 144959 Deck Belt (1/2″ x 95″) fits Craftsman LT1000 LT2000 LT3000 DYT4000 42 inch Deck Riding Mower, Husqvarna Poulan AYP Lawn Mower Replaces OEM 138255 532144959 532138255.

What size Deck Belt does a CRAFTSMAN LT 1500 take?

MTD 42 Inch Mower Deck Belt MTD Troy Bilt Craftsman LT1500 Rider Tractor 954-04060B.

How long is a 429636 belt?

Sunbelt L-429636 42-in Deck Belt for Riding Mower/Tractors (1/2-in W x 101.5-in L)

How long is a Deck Belt 954 04060B?

Product Details

MaxPower’s 336351B drive belt for MTD, Cub Cadet and Troy-Bilt mowers replaces OEM numbers 754-04060, 754-04060B, 754-04060C, 954-04060, 954-04060B and 954-04060C. This belt measures 1/2 in. x 96-1/2 in.

How do you measure a Deck Belt?

What size belt is 405143?

Replaces OEM #’s 405143, 532405143, 58445310, PP21008, 575937701 and 7133156 also replaces Ariens OEM # 21546607. This belt measures 105-3/4 in.

How do I know what belt size I need?

A simple way to determine belt size is to simply “add 2″ to your trouser size. For example, if you wear a 34” waist trouser, then a 36 belt size will be a perfect fit. Most will find this simple formula works best for pants worn at a traditional height–close to the natural waistline.

See also  How throttle and choke linkage is setup on a Briggs 2 piece?

What do belt size numbers mean?

The first one, and the more recognizable one, is the manufacturer’s part number, which is referenced when ordering the part. The second, and lesser known one, is a global industry standard number that indicates the size of the belt.

How do you read a belt number?

Automotive belts start with either 4L (12.5mm wide) or 3L (9.5mm). The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside.

What do the letters on a belt mean?

Featured on classic V-belts are markings, i.e. profile and number, which stands for the inner length, given in inches. This is followed by a number representing millimetres, Li, which stands for the inner length. Marked on narrow belts are the profile and length in millimetres, Lw, which stands for the working length.

What does V mean in belts?

A V-belt is a wedge-shaped belt manufactured out a rubber compound, reinforced with a tensile cord specifically engineered to transmit power into movement. V-belts can be found in driving mechanisms, such as engines in air compressors, fans, and pumps.

Leave a Comment